|
Flow Testers
Here you will find flow testers to measure air velocity and air pressure. Depending on the type of application, flow testers are made as hot-wire flow testers or pocket weather flow testers, both of which can measure air velocity and air pressure. The results of measuring the air velocity can be stored in memory, depending on the model. There are a total of 25 flow testers available. They are ideal for taking quick or constant measurements. You will find a suitable device for whichever application, that is to say, for industry, private workshops or for hobbies, including to monitor ventilation installations, process checking, for nautical enthusiasts, etc. Accessories are also available along with ISO calibration certificates for these instruments (information: calibration of flow testers). Here you will find a table with wind velocities and an approximate classification. If you don't find the flow testers you are looking for, please contact us and we will help you find the best solution to suit your needs by calling our offices on:  UK customers +44(0) 23 809 870 30 / US customers (561) 320-9162 and our technical staff will advise you regarding our products.
Here you can see flow testers from
these companies:
       
The following links provide technical specifications for our Flow Testers:
|
|
- PCE-007 Flow Testers
(Flow testers with side wheel, memory, RS-232, software)
|
 |
|
-
KM-series
Flow Testers
(Air
Velocity Meter with metal fans,
USB-interface)
|
 |
|
- TA-410 Flow Testers
(Flow testers with straight / flexible probe, thermal measurement principle)
|
 |
|
- PVM-620 Flow Testers 
(Flow testers with Pitot tube, for high circulation speed)
|
 |
|
- PCE-VS series Flow Testers
(Flow testers to measure flow both in pipelines and ventilation ducts for air or water)
|
 |
|
- X8 and X16 Flow Testers
(Flow testers to determine flow velocity and volume)
|
 |
|
- PCE-VR series Flow Testers
(Flow testers to measure air flow in m³/h in pipelines and ventilation ducts, max.10.000 m³/h)
|
 |
|
The following links provide technical specifications about our Flow Testers for liquids:
|
|
- DC 2000 W Flow Testers for liquids
(Flow testers to
measure also temperature and flow)
|
 |
|
- P-770-M Flow Testers for liquids
(Flow testers to measure
the speed and temperature of air and water, max. 40 m/s,
USB)
|
 |
|
- PCE-TDS 100 Flow Testers for liquids
(Flow testers according determines flow velocity for homogeneous liquids)
|
 |
|
- PCE-VS series Flow Testers for liquids
(Flow testers to measure flow both in pipelines and ventilation ducts for air or water)
|
|
|
- PCE-VMI series Flow Testers for liquids
(Flow testers to measure electrical
conductivity liquids 50 µs/cm)
|
 |
|
- Flow Testers for stationary use
(Flow sensors for the connection to
evaluation units, standard output signal)
|
 |
|
Some flow testers uses, for example, the PCE-007 which has internal memory and can transfer data to a computer for further evaluation by way of an RS-232 cable and software
|
|
|
|
|
|
|
The PCE-VR model of flow testers measuring the flow in a ventilation duct.
|
Display of the PCE 770 model
of flow testers measuring wind speed.
|
PCE-007 series flow testers include software (with data logger)
|
ISO calibration certificate
for flow testers
|
(Conversion information for units used by flow testers).
|
|
Measurement of air velocity shown on
the large LCD on the PCE-077 model of flow testers.
|
The PCE-TDS 100H ultrasonic model
of flow testers measuring a pipe.
|
|
If you wish to view or print the selection of flow testers in our catalogue, click the PDF symbol
|
|
